Lakeshore Technologies Inc.
ABOUT US     CONTACT US     QUALITY
HOME         PRODUCTS         COMPANY         SITE MAP

CCD Camera Specs

SS960 Camera

  • FT18 CCD Sensor
       Type: Frame Transfer
       Optical size: 7.68 mm (H) x 7.68 mm (V)
       Chip size: 8.9 mm (H) x 17.0 mm (V)
       Pixel size: 7.5 µm x 7.5 µm
       Image diagonal: 10.9 mm
       Aspect ratio: 1:1
  • MTF: Limiting resolution 67 lp/mm
       50% at 60 lp/mm
       95% at 40 lp/mm
  • Sensitivity: Full-well capacity Floating Diffusion(FD)Typically 120 kel
  • Dynamic Range: Typically 63.5db
  • Camera Functions:
       Manual Gain: 0.125 to 31.5
       Auto Gain Target Level: 0 - 4080
       Manual Black: -1024 to +1016
       Auto Black Target Level: -1024 to +1016
       Level Detection: Peak or Average
       Image Reversal: Horizontal (Digital Output), Horizontal, Vertical and 90 degree rotation (VGA Output)
       ABC Output: -6.0V to +6.0V or 0.0V to +12.0V and compliment
       Noise Reduction: 4.7 dB Infinite impulse response (IIR) and 3.0 dB Finite impulse response (FIR)
       Gamma: 16 preprogramed log. slopes or three segment piecewise linear curve defined by two adjustable breakpoints and the initial logarithmic curve
  • Camera Control: Drive logic: Opto-isolated 3.3 to 15V on a 25-pin female D connector.
  • Video Output:
       Digital: 12 bit LVDS (ANSI TIA/EIA-644) on 68 pin SCSI-3 connector;
       Analog: VGA, 1280x1024@60 non-interlaced on standard VGA 15 pin D and 75 Ohm BNC, shared with the VGA green channel.
  • Physical Size:
       Camera: 5" x 5" x 2" (12.7cm x 12.7cm x 5.0cm)
       CCU (Rack Mount): 19" x 13.8" x 3.5" (48.3cm x 35.0cm x 8.9cm)
       CCU (Table Top):18.25" x 13.8" x 3.5" (46.4cm x 35.0cm x 8.9cm)
  • Power:
       Line Voltage: 86 – 250VAC
       Line Frequency: 50/60 Hz
       Operating: 58 Watts
  • Environmental:
       Operating temperature: -10 to 45 degrees Celsius
       Ambient temperature: 15 to 45 degrees Celsius
       Humidity: 15% to 95% rh non-condensing
       Altitude: 10,000 feet (3050 meters)

SS960L Camera

  • FT1010 CD Sensor
       Type: Frame Transfer
       Optical size: 12.288 mm (H) x 12.288 mm (V)
       Chip size: 40 mm (H) x 40 mm (V)
       Pixel size: 12 µm x 12 µm
       Image diagonal: 17.38 mm
       Aspect ratio: 1:1
  • Performance:
       Limiting resolution 67 lp/mm
       50% at 60 lp/mm
       95% at 40 lp/mm
       Full-well capacity linear operation (Qlin) Typically 350 kel
       Dynamic Range : Typically 72 dB
  • Camera Functions:
       Manual Gain: 0.125 to 31.5
       Auto Gain Target Level: 0 - 4080
       Manual Black: -1024 to +1016
       Auto Black Target Level: -1024 to +1016
       Level Detection: Peak or Average
       Image Reversal: Horizontal (Digital Oupt), Horizontal, Vertical and 90 degree rotation (VGA Output)
       ABC Output: -6.0V to +6.0V or 0.0V to +12.0V and compliment
       Noise Reduction: 4.7dB Infinite impulse response (IIR) and 3.0dB Finite impulse response (FIR)
       Gamma: 16 preprogramed log. slopes or three segment piecewise linear curve defined by two adjustable breakpoints and the initial logarithmic curve
  • Camera Control: Drive logic: Opto-isolated 3.3 to 15V on a 25-pin female D connector
  • Video Output:
       Digital: 12 bit LVDS (ANSI TIA/EIA-644) on 68 pin SCSI-3 connector
       Analog: VGA, 1280x1024@60 non-interlaced on standard VGA 15 pin D and 75 Ohm BNC, shared with the VGA green channel
  • Physical Size:
       Camera: 5" x 5" x 2" (12.7cm x 12.7cm x 5.0cm)
       CCU (Rack Mount): 19" x 13.8" x 3.5" (48.3cm x 35.0cm x 8.9cm)
       CCU (Table Top): 18.25" x 13.8" x 3.5" (46.4cm x 35.0cm x 8.9cm)
  • Power:
       Line Voltage: 86 – 250VAC
       Line Frequency: 50/60 Hz;
       Operating: 58 Watts
  • Environmental:
       Operating temperature: -10 to 45 degrees Celsius;
       Ambient temperature: 15 to 45 degrees Celsius;
       Humidity: 15% to 95% rh non-condensing;
       Altitude: 10,000 feet (3050 meters)
top >>>