Tube Camera Specs

SS200 Camera

• Over 1000 line resolution.
• Camera tube type: 1 inch separate mesh *vidicon selected for x-ray quality (*plumbicon-optional).
• Tube Operation: 50 gauss with 550 volt accelerating potential.
• Scan Rates: 
     525 line 60 Hz positive 2:1 interlace conforming to EIA standards RS-170 or
     625 line 50 Hz positive 2:1 interlace conforming to European standards.
• Automatic light compensation 50,000:1.
• All ten shades of gray scale, discernible on standard EIA test chart.
• Video Output: 1.0 volts peak to peak composite (adjustable to 1.2 volt, 75 ohm termination).
• Video Noise Level: Equivalent to less than 1.0 nanoampere.
• Video Bandwidth: 14 MHz  +0db / -4db.
• Geometric Distortion: Less than 1% in total circular image.
• Environmental: Ambient temperature 15 degrees C to 45 degrees C, Humidity 95% noncondensing, Altitude 10,000 ft (3050 meters).
• Electrical Features: Automatic Gain Control, Antivignetting, Automatic black level clamp, Automatic beam current regulation, Horizontal and vertical sweep reversals, Horizontal and vertical sweep failure protection, Gamma Correction, Adjustable peak white clipper, Go to Black circuitry with standby target voltage and focus current switching, ABC servo output.
• Electrical Requirements:
    Input voltage: 115 VAC 50/60 Hz  +10% / -15% Or 230 VAC 50/60 Hz  +10% / -15%.
    Input Power: 16 watts.
• Mechanical:
    Size: Depth 7.53 inches(191.0 mm), Height 5.00 inches(127.0 mm),Length 7.38 inches (187.5 mm)
    Weight: 11.50 Lbs (4.8 Kg).
  
  top >>>

SS600 Camera

• Over 1000 line resolution.
• Camera tube type:1 inch separate mesh *vidicon selected for x-ray quality (*plumbicon-optional).
• Tube Operation:60 gauss with 850 volt accelerating potential.
• Scan Rates: 
     525 line 60 Hz positive 2:1 interlace conforming to EIA standards RS-170 or
     625 line 50 Hz positive 2:1 interlace conforming to European standards.
• Automatic light compensation 50,000:1.
• All ten shades of gray scale, discernible on standard EIA test chart.
• Video Output: 1.0 volts peak to peak composite (adjustable to 1.2 volt, 75 ohm termination).
• Video Noise Level: Equivalent to less than 1.0 nanoampere.
• Video Bandwidth: 14 MHz  +0db / -4db.
• Geometric Distortion: Less than 1% in total circular image.
• Environmental: Ambient temperature 15 degrees C to 45 degrees C, Humidity 95% noncondensing, Altitude 10,000 ft (3050 meters).
• Electrical Features: Automatic Gain Control, Antivignetting, Automatic black level clamp, Automatic beam current regulation, Horizontal and vertical sweep reversals, Horizontal and vertical sweep failure protection, Gamma Correction, Adjustable peak white clipper, Go to Black circuitry with standby target voltage and focus current switching, ABC servo output.
• Electrical Requirements:
    Input voltage: 115 VAC 50/60 Hz  +10% / -15% Or 230 VAC 50/60 Hz  +10% / -15%.
    Input Power:  24 watts.
• Mechanical:
    Size: Depth 8.96 inches(227.5 mm), Height 5.67 inches(144 mm), Length 8.01 inches (203.5 mm)
    Weight: 14.0 Lbs (5.8 Kg).
  
  top >>>

SS750 Camera

• 25mm (1") high performance camera tube selected for medical X-Ray quality.
• Optional tube types include *Vidicons, *Newvicons, *Plumbicons, *Saticons, or *Primicons.
• Operation of either  Triode or Diode gun tubes.
• Programmable LED bias lighting for Pulsed Fluoro and Digital Spot acquisition.
• Over 11 bit acquisition resolution.
• 30 Hz or 25 Hz progressive scanning.
• 60 gauss operation with 800 volt accelerating potential, for maximum resolution (50% min MTF @1024 pixels).
• Geometric distortion less than (+ or -) 0.5%.
• Video noise equivalent to less than 0.8 nanoampere RMS Permits a signal-to-noise ratio of 2500 to 1 (68 dB).
• Electrical features: Windowed Sample and Hold average AGC and peak Automatic Black, Antivignetting, LED bias light option, ABC servo output, Video and vidicon beam circular blanking, Standby focus current and beam current switching, Gamma correction with Soft Peak white clipping, Horizontal and Vertical sweep failure protection, Automatic beam current regulation.
• Remote control of: Horizontal Sweep Reverse, Vertical Sweep Reverse, Video Gain and Black Level, Vidicon Beam Blanking, Focus Coil Current Switching, Bias Light.
• Electrical requirements:
    Approximately 15 watts DC, +22.5 volts DC @ 500 mA,
    -11 volts DC @ 300 mA,
    Horizontal and Vertical drive signals and Remote control multiplex signal.
• Environmental:
    Ambient temperature 15 to 45 degrees Celsius,
    15% to 95% rh non-condensing.
     Altitude 10,000 feet  (3050 meters).
• (optional)  Neutral Density Light Attenuator Mechanism (for Digital Spot acquisitions) or Auto Iris and Neutral Density Systems and Controller.
  
  top >>>

SS750-1000 Camera

• 25mm (1") high performance camera tube selected for medical X-Ray quality.
• Optional tube types include *Vidicons, *Newvicons, *Plumbicons, *Saticons, or *Primicons.
• Operation of either  Triode or Diode gun tubes.
• Programmable LED bias lighting for Pulsed Fluoro and Digital Spot acquisition.
• Over 11 bit acquisition resolution.
• 525 line at 30 Hz or 25 Hz progressive scanning.
• 1024 line at 15 Hz or 12.5 Hz progressive in High Res. mode.
• 60 gauss operation with 800 volt accelerating potential, for maximum resolution (50% min MTF @1024 pixels).
• Geometric distortion less than (+ or -) 0.5%.
• Video noise equivalent to less than 0.8 nanoampere RMS Permits a signal-to-noise ratio of 2500 to 1 (68 dB).
• Electrical features: Windowed Sample and Hold average AGC and peak Automatic Black, Antivignetting, LED bias light option, ABC servo output, Video and vidicon beam circular blanking, Standby focus current and beam current switching, Gamma correction with Soft Peak white clipping, Horizontal and Vertical sweep failure protection, Automatic beam current regulation.
• Remote control of: Horizontal Sweep Reverse, Vertical Sweep Reverse, Video Gain and Black Level, Vidicon Beam Blanking, Focus Coil Current Switching, Bias Light.
• Electrical requirements:
    Approximately 15 watts DC, +22.5 volts DC @ 500 mA,
    -11 volts DC @ 300 mA,
    Horizontal and Vertical drive signals and Remote control multiplex signal.
• Environmental:
    Ambient temperature 15 to 45 degrees Celsius,
    15% to 95% rh non-condensing.
     Altitude 10,000 feet  (3050 meters)
• (optional)  Neutral Density Light Attenuator Mechanism (for Digital Spot acquisitions) or Auto Iris and Neutral Density Systems and Controller.
  
  top >>>

* Registered Trade Names